Feedback PID + Our special dynamic control calculation, Lneya PLC controller
Material reaction temp.control mode and jacket temp.control mode
10 programs, each program can edit 45 steps.
MODBUS RTU Protocol,RS485 interface
Optional Ethernet interface/R232 interface
The temperature of three points: the inlet and outlet of heat-conducting medium, material in reactor(External temperature sensor), PT100 sensor
Material temp. feedback
Material temp. feedback：PT100 or 4～20mA or communication given
Set or control oil outlet temp and reactor material temp. difference
Set or control equipment liquid inlet temp. And liquid outlet temp. Difference( keep system safe)
±1℃ （sometimes ±0.5℃）
Thermal medium temp. accuracy
Closed circulation system
The whole system is full closed circulation, there is no oil mist at high temperature and no water vapor at low temperature, pressure do not rise up when system is running. The system will supply oil automatically at low temperature.
Heating max output power
The heater has triple protection and independent temperature limiter to ensure the safety of heating system.
The power is greater than 15KW with a voltage regulator, and the heating power output control adopts 4-20ma linear control.
The power of taking away the heat at different temperature
Circulation flow rate and pressure
Lower than 75L/min, use Lneya Magnetic pump
Higher than 75L/min use Ultra wide temperature high energy efficiency centrifugal pump.
Pressure selection: 2bar 3bar 5bar 8bar（small power equipment can not customize）
The greater the pressure, the greater the power of the motor, which will increase the system load and reduce the cooling capacity of the system.
Different type different brand compress
Mitsubishi, skop, Emerson, Danfoss, Italy Dorin, German blog, bizell, French Tecumseh.
Select different expansion valves with different temperature and cooling capacity.
Lneya 7-inch touch screen，show temp curve\EXCEL data output
Optional Siemens explosion - proof touch screen.（Place the operation panel outside the site area.）
optional GMP, FDA operation and record module (operator use record, data record, alarm record, etc.)
Self-diagnosis function; freezer overload protection; high pressure switch, overload relay,thermal protection device, liquid low level protection, high temperature protection and temperature fault protection.
Optional self-pressurized 3bar system, the temperature of the system can be expanded, the expansion tank is normal pressure.
KDOC-80 can be used in a pressurized system with a maximum temperature of 250 degrees (-85 degree ~ 250 degree).
KDOC-220 can be used in the self-pressurized system with maximum temperature to 320 degrees (-50 degree ~ 320 degree).
KDOC-210 can be used in a self-pressurized system with a maximum temperature of 300 degrees (-70 degree ~ 300 degree)
Optional flow/pressure sensor, display flow and pressure on the touch screen.
Optional control flow/pressure.
One for two system
Optional one for two systems: the costis lower than one to one system.
One unit heating and cooling machine contains two circulation system, two cooling system, two heating systems, one expansion system, one electrical system.
High exothermic control
Customizable high heat control system algorithm and components.
flow reactor temperature control module.
It can be used in the flow reactor temp control system (pump, internal circulation system, control algorithm, refrigeration)
Packing & Shipping
UPS/DHL/FEDEX/TNT express are available for your choose which take 3~ 5 days to arrive,and we will offer the tracking number for you to check the status of your items online at any time.
By air cargo which takes about one week to arrive .
By sea which takes about 20-30days to arrive , depending on your actual requirements.
12 months warranty for scientz High Throughput Tissuelyser
If any technical problem during warranty time, replacement parts will be sent free of charge.
Technical support is also available in whole time.
1. Reply your enquiry in 24 working hours.
2. Experienced staffs answer all your questions in fluent English.
3. OEM is available if the quantity is large.
4. We offer very competitive for all our products.
Our machines undergo an extensive and strict testing and quality control procedure, ensuring every item purchased meet global quality standards.It's safe and reliable quality for scientz High Throughput Tissuelyser.
Hot Tags: national refrigerator, suppliers, manufacturers, customized, buy discount